home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Graphics Plus
/
Graphics Plus.iso
/
msdos
/
viewers
/
cshw844a
/
drivers.doc
< prev
next >
Wrap
Text File
|
1992-03-12
|
12KB
|
296 lines
Current Video and Printer Drivers
=================================
VIDEO DRIVERS: as of January, 1992
=============
This is a current listing of the video drivers included with CompuShow. Modes
in (parentheses) are simulated. Note that some modes may not be available on
your video adapter. For example:
- 16 color 1024x768 requires a 512K VGA,
- 256 color 640x480 requires a 512K VGA,
- 256 color 1024x768 reguires a 1M VGA, and
- 256 color modes on an 8514/A adapter require the memory expansion.
Also, VGA adapters that are built-in to a system board or bundled with a
computer (unless you're getting a specific name-brand board), are frequently
low-end (cheap) adapters, and probably don't have "Super-VGA" capabilities.
Finally, remember that all IBM standard graphics modes are 'built-in' to
the program. If your graphics adapter doesn't go beyond the standard modes,
then you don't need a video driver.
Driver Notes
=====================================================================
A2=ATI Graphics Solution
320x200x16, 640x200x16
A3=Ahead Systems
800x600x16, 1024x768x16, 640x400x256, 640x480x256, (640x480x256),
800x600x256, 1024x768x256
A4=Amstrad PC1512
(320x200x16), 640x200x16
A5=ATI Vga Wonder(s)
800x600x16, 1024x768x16, 640x400x256, 640x480x256, 800x600x256,
1024x768x256, 640x480x32k
A6=AT&T 6300
640x400x2, 640x400x16
A7=AcuMos
800x600x16, 1024x768x16, 640x400x256, 640x480x256, 800x600x256
C1=Chips & Technologies Cardinal
800x600x16, (320x400x256), 640x400x256, 640x480x256, (640x480x256),
800x600x256
C2=Compaq VGA
640x480x256
C3=Cirrus
640x400x16, 720x540x16, 800x600x16
D1=DGIS
(Available modes depend on the video adapter and DGIS interface)
[DRIVERS.DOC] Page 1
E1=Everex VGAs
800x600x16, 1024x768x16, (320x400x256), 640x400x256, 640x480x256,
800x600x256, 1024x768x256
G1=Genoa 6400
800x600x16, 1024x768x16, 512x512x256, 640x350x256, 640x400x256,
640x480x256, 800x600x256
H1=Hercules Graphics Station
640x400x256, 640x480x256, 800x600x256, 1024x768x256, 1024x768x256,
640x480x32k, 512x480x16m
[ The first 1024x768x256 (mode "V") is interlaced,
the second (mode "W") is non-interlaced ]
H2=Hercules InColor
720x348x16, (360x174x16)
I1=Generic CGA (any CGA)
160x100x16, (320x200x16)
I3=IBM PGC IBM Professional Graphics Controller,
Vermont Microsystems
(320x200x256), (320x240x256), (320x400x256), (320x480x256),
(640x400x256), 640x480x256
I4=IBM 8514/A Single monitor
I5=IBM 8514/A 8514+VGA monitor
640x480x16, 1024x768x16, 640x480x256, 1024x768x256
[Load the 'Adapter Interface' (HDILOAD) in AUTOEXEC.BAT]
I7=IBM XGA
1024x768x16, 640x480x256, 1024x768x256, 640x480x64k
N1=NCR VGA
800x600x16, 1024x768x16, 640x400x256, 640x480x256, 800x600x256
O1=Oak Technologies [see "CAUTION", below]
800x600x16, 1024x768x16, (320x480x256), 640x480x256, 800x600x256,
1024x768x256
P1=Paradise AST, Compaq, Dell
800x600x16, 1024x768x16, (320x400x256), 640x400x256, 640x480x256,
(640x480x256), 800x600x256
P2=Plantronics
320x200x16
S1=STB EM16+ This driver is identical to T4, except for
one "non-standard" mode number
800x600x16, 1024x768x16, (320x400x256), 640x400x256, 640x480x256,
800x600x256, 1024x768x256
S2=STB Ergo + Sierra DAC
640x400x256, 640x480x256, 800x600x256, 1024x768x256, 320x200x32k,
640x480x32k, 800x600x32k
[DRIVERS.DOC] Page 2
T1=Tseng 3000 Genoa, STB, Orchid
800x600x16, 1024x768x16, (320x350x256), (320x480x256), 640x350x256,
640x480x256, 800x600x256
T2=Tandy 1000SL/TL "ETGA"
640x200x16, (320x200x16)
T4=Tseng 4000 series Orchid ProDesigner II
800x600x16, 1024x768x16, (320x400x256), 640x400x256, 640x480x256,
800x600x256, 1024x768x256
T5=Trident 8900 series Logix, ZyMOS
800x600x16, 1024x768x16, (320x400x256), 640x400x256, 640x480x256,
800x600x256, 1024x768x256
T6=Tseng 4000 series VGAs with Sierra DAC
640x400x256, 640x480x256, 800x600x256, 1024x768x256, 640x400x32k,
640x480x32k, 800x600x32k
V1=Video 7
800x600x16, 1024x768x16, (320x400x256), 640x400x256, 640x480x256,
800x600x256, 1024x768x256
V2=VBE (VESA Bios Extensions)
800x600x16, 1024x768x16, 640x400x256, 640x480x256, 800x600x256,
1024x768x256, 1280x1024x256, 640x480x32k, 800x600x32k, 640x480x64k,
640x480x16m
[Maximum of SEVEN of the above modes. Available modes depend BOTH on the
capabilities of the video adapter and the VESA Bios Extensions.]
CAUTION: Problems with Oak VGAs
-------------------------------
There seems to be a serious problem with the Oak BIOS, and if you try to use
the System Configuration program CSHOWI to test (or CSHOW to display) an Oak
mode which isn't available on your VGA, it will still attempt to set the
graphics mode, and throw the VGA into a configuration where it will no
longer do ANY extended graphics modes until you re-boot!
The only way around this bug in the Oak BIOS is to select the Oak driver
(perform one test in CSHOWI and then ESCape to skip the rest) and set up
VIDEO.DAT manually:
- With the Oak video driver selected, use CSHOW to display a graphic in
each video driver mode UNTIL YOU ENCOUNTER A MODE THAT DOESN'T WORK.
- Re-boot the computer and continue testing.
- Once you have a list of the modes which DO WORK, set up VIDEO.DAT with
the corresponding letters:
COPY CON VIDEO.DAT
STVW^Z (^Z means hold down the CTRL key and type Z.)
[DRIVERS.DOC] Page 3
Printer Drivers: as of January, 1992
----------------
Note that the <Q>uality print mode of MOST COLOR PRINTERS and the LASERJET
and DESKJET at 300dpi requires MORE THAN 640k of memory, as CompuShow must
expand, rescale and dither the entire image to the 'virtual screen' (VScreen
on the Shift-F1 box), before it starts to print. This means if you don't have
EMS or XMS memory, you'll be limited to the <F>ast print mode.
The following printer drivers are included with the enhanced program:
Color Printer Drivers
=============================================================================
IBM Color Printer Vertical dot spacing is 84 dpi.
Single Density: esc,'K',n1,n2 Prints at 84 dots/inch.
Double Density: esc,'L',n1,n2 Prints at 168 dots/inch.
=============================================================================
Color 8 pin (EX-800) GENERIC 8 pin color driver for 24/216" graphics
line spacing. Tested on a Star NX-1000 Rainbow and
Citizen MSP-50. Similar to EX-800, LX-800, FX-86e,
LX-86, LX-80.
Single Density: esc,'*',0,n1,n2 Prints at 60 dots/inch.
Dual Density: esc,'*',1,n1,n2 Prints at 120 dots/inch.
=============================================================================
Color 8 pin (JX-80) Identical to COLOR8A, except for 20/180" line
spacing. Similar to JX-80, LQ-1500, ALPS ALQ200.
Single Density: esc,'*',0,n1,n2 Prints at 60 dots/inch.
Dual Density: esc,'*',1,n1,n2 Prints at 120 dots/inch.
=============================================================================
Color 24 pin (LQ-2550) GENERIC 24 pin color printer for 24/216" graphics
line spacing. Similar to LQ-2550.
Single Density: esc,'*',0,n1,n2 Prints 8 pins at 60 dots/inch.
Dual Density: esc,'*',33,n1,n2 Prints 24 pins at 120 dots/inch.
CRT III: esc,'*',38,n1,n2 Prints 24 pins at 90 dots/inch.
=============================================================================
Okidata 290 series color Tested on a model 292.
Single Density: esc,'K',n1,n2 Prints at 60 dots/inch.
Double density: esc,'L',n1,n2 Prints at 120 dots/inch.
[DRIVERS.DOC] Page 4
Monochrome Printer Drivers
=============================================================================
IBM/EPSON 8pin (n/216") a GENERIC driver for 8 pin printers that specify
line spacing in multiples of 1/216"
Single Density: esc,'K',n1,n2 Prints at 60 dots/inch.
Double Density: esc,'L',n1,n2 Prints at 120 dots/inch.
=============================================================================
IBM/EPSON 8pin (n/180") a GENERIC driver for 8 pin printers that specify
line spacing in multiples of 1/180"
Single Density: esc,'K',n1,n2 Prints at 60 dots/inch.
Double Density: esc,'L',n1,n2 Prints at 120 dots/inch.
=============================================================================
Citizen MSP 10/15/20/25 a GENERIC driver for 8 pin printers that support 72
and 144 dpi.
One-to-one esc,'*',5,n1,n2 Prints at 72 dots/inch.
Two-to-one esc,'*',7,n1,n2 Prints at 144 dots/inch.
=============================================================================
KX-P2624 (24 pin: LQ1050) for 24 pin Epson compatible printers.
CRT II: esc,'*',6,n1,n2 Prints 8 pins at 90 dots/inch.
Double Density: esc,'*',33,n1,n2 Prints 24 pins at 120 dots/inch.
=============================================================================
KX-P2624 (ProPrntr XL24E) for the IBM Pro Printer XL24E and compatibles.
Double Density: esc,'[g',n1,n2,1 Prints 8 pins at 120 dots/inch.
Double Density: esc,'[g',n1,n2,9 Prints 24 pins at 120 dots/inch.
=============================================================================
HP DeskJet 75/300 dpi prints slightly darker than the LaserJet driver.
75 dpi esc,'*t75R' Prints at 75 dots/inch.
300 dpi esc,'*t300R' Prints at 300 dots/inch.
=============================================================================
HP LaserJet 75/150 dpi for Laser Jets with limited memory installed.
75 dpi esc,'*t75R' Prints at 75 dots/inch.
150 dpi esc,'*t150R' Prints at 150 dots/inch.
=============================================================================
HP LaserJet 75/300 dpi for Laser Jets with adequate memory installed.
75 dpi esc,'*t75R' Prints at 75 dots/inch.
300 dpi esc,'*t300R' Prints at 300 dots/inch.
=============================================================================
HP Thinkjet [MDL 2225C] supports 96 and 192 dpi.
Single Density: esc,'K',n1,n2 Prints at 96 dots/inch.
Double Density: esc,'L',n1,n2 Prints at 192 dots/inch.
=============================================================================
IBM Compact has one graphics mode, at 70 dpi
Single Density: esc,'L',n1,n2 Prints at 70 dots/inch.
=============================================================================
NEC 8023 May also work with the C.Itoh Prowriter.
Bit-Image: esc,'S',a1,a2,a3,a4 Prints at 80 dots/inch.
=============================================================================
Okidata ML92/ML93 prints 7 pin graphics.
10 pitch: 30,3 Prints at 60 dots/inch.
12 pitch: 28,3 Prints at 72 dots/inch.
[DRIVERS.DOC] Page 5